19″ Rack Case and Sleeve

Another flight case for the boys at Radiohead

This flight case with an inner 19″ 16U rack sleeve have been popular for many years as they can be custom built to any height and depth.

19″ Rack Sleeve And Case

As with all inner rack sleeves this 19″ sleeve can be fitted with recessed handles or hand holes along with the option of a sloping front for easier viewing if the rack is going to be sited low. The standard 19″ rack strip is fitted to the front of the rack with optional rear racking, allowing support shelves to be used, is  available if required.

The outer flight case was constructed using 10mm Vameldeck diamond board is designed with a shallow base and a larger lift off lid with the whole case being fully lined with 25mm polyester foam as is usual for this type of set-up.

With the 3D Flight Cases flight case construction using their unique ‘double angle’ along withthe four recessed handles requested and four heavy duty castors, two of which are of the locking type, each rated at 250kgs

Check out many 19″ Rack Cases at the 3D Flight Case website