19″ Racks

19″ Rack Case and Sleeve

Another flight case for the boys at Radiohead

This flight case with an inner 19″ 16U rack sleeve have been popular for many years as they can be custom built to any height and depth.

19″ Rack Sleeve And Case

As with all inner rack sleeves this 19″ sleeve can be fitted with recessed handles or hand holes along with the option of a sloping front for easier viewing if the rack is going to be sited low. The standard 19″ rack strip is fitted to the front of the rack with optional rear racking, allowing support shelves to be used, is  available if required.

The outer flight case was constructed using 10mm Vameldeck diamond board is designed with a shallow base and a larger lift off lid with the whole case being fully lined with 25mm polyester foam as is usual for this type of set-up.

With the 3D Flight Cases flight case construction using their unique ‘double angle’ along withthe four recessed handles requested and four heavy duty castors, two of which are of the locking type, each rated at 250kgs

Check out many 19″ Rack Cases at the 3D Flight Case website

NATO Stock Number

NATO Stock Numbers

As well as our custom flight cases and custom 19″ racks 3D Flight Cases also offer a huge range of standard sized cases and racks, of which around 1200 have been assigned NATO Stock Numbers.

We have now added a searchable list of all NATO Stock numbers for all our products that have these codes.

A NATO Stock Number, or as it is known in the USA, a National Stock Number (NSN) consists of a 13-digit numeric code and is recognized by all NATO countries and identifies all ‘ standardized material items of supply ‘.

These are not only used by the military but by relief agencies around the globe, government offices and by many countries outside NATO including for example Japan, Australia and New Zealand.

Justin Case
3D News Desk

Flight Case | 19″ Rack Cases | Aluminium Cases | Storm Case | Polypropylene Cases

Hardigg BlackBox Racks – Oil and Gas Industry

Waterproof 19″ Rack Cases

If you are looking at overcoming challenges of using electronic equipment on offshore platforms or during oil and gas exploration in harsh and hostile environments  then you can follow the example of one of 3D Flight Cases customers. Hermes Datacomms offers services in over 54 countries, representing 92% of the world’s oil & gas reserves and have gained extensive knowledge and experience in developing communication solutions for the oil and gas industry. Their choice of protection was thirteen Hardigg Blackbox  Racks for their latest project.

The cost effective Blackbox 19″ rack reduces costs by using recycled materials in the shell, a steel frame and less facilities for optional extras to be fitted than Hardiggs other 19″ rack ranges. The Hardigg BlackBox, unlike the competition at this price point is fully airtight and watertight, and boasts significantly better light duty shock performance, upholding Hardigg’s industry leading standards. This range of  waterproof 19″ racks are avaible in 3U, 4U, 5U, 7U, 9U, 11U and 14 units in height.

All Hardigg Blackbox racks have wheels built into the rear lids to make them a truly portable rack case.The Hardigg BlackBox is only available in, you guessed it, black.  The BlackBox rack is ideal for light to medium duty field-deployed and sheltered applications up to 45kg. The Hardigg BlackBox is designed to meet ANSI/EIA 310-C for universal rack mounting and exceeds Air Transport Association’s Specification 300, Category 1 requirements.

When you need to be cost-conscious but can’t sacrifice performance, the Pelican-Hardigg BlackBox is the answer.

Other models in the Hardigg Rack range include the Hardigg Classic Rack, Hardigg SuperMac and the Hardigg MAC rack

Justin Case
3D News Desk

Flight Cases | 19″ Rack Cases | Peli Cases | Storm Case | Padded Bags

Flight Case Rack – Anti-Vibration Mount

Shock Mounted 19″ Rack Cases

3D flight case racks are the most versatile of our range of 19″ anti-vibration mounted racks as they can be built exactly to your requirements at no extra charge with no predetermined width, height or depth or ordered from our standard range. Our flight case rack range is available from 2 unit upwards and in standard depths of 450mm, 500mm, 550mm, 600mm, 650mm, 700mm, 800mm, 900mm and 1000mm. Styles include single or multi-bay and standard fixing or shock mounted racks. Single, double or triple lids are the most common deigns but other possibilities include removable panels and hinged panels.

The frame style and anti vibration mounts vary depending on the the fragility of the items, normally expressed in “G” units.

19″ Anti Vibration Frame Mount The larger the G force needed to cause item breakage, the less protection necessary from shock and transit vibration is required.

This sub assembly is then inserted into the case with the added bonus of allowing improved ventilation around the 19″ equipment itself.

Castors are usually added either to base of each case or on taller racks the caster can be mounted on the rear to aid stability when being transported around.

 Justin Case

3D News Desk

Flight Cases | 19″ Rack Cases | Peli Cases | Storm Case | Padded Bags

19″ Installation Rack Cabinets

New Low Prices on 19″ Installation Server Racks

3D Flight Cases offer the latest range of 19″ installation rack cabinets which are ideal for all rack mounted audio visual, sound and lighting installs.  These install rack cabinets are available in three styles, two wall mounted/free standing installation rack cabinets and one floor standing install rack.

Extremely strong powder coated 19″ electronic cabinets made from 2mm thick steel, have a welded construction and a toughened glass door as standard. Heights range from 6U to 42 units and cabinet depths include 250mm, 450mm, 600mm and 1000mm.

Whether it’s use is for a audio, AV, lighting or server rack and data communication there is easy access (via removable side panels with spring latches) for cabling and maintenance along with natural and forced ventilation panels. The 19″ install cabinet has front and back adjustable inner rack rails for variable depth.

WALL MOUNTED 19″ INSTALLATION RACKS

The Penn Elcom DW 66 installation rack enclosures are designed to be wall mounted and allow access to both front and back due to the hinged rear and come boxed boxed and ready for immediate use. Side access is also provided to the rack cabinet via removable side panels with spring latches.

19″ SEVER RACK CABINET

The Penn Elcom EMS-66 & EMS-610 are free standing installation cabinets that are flat packed and offer easy and quick assembly. Made from 2.00mm steel, this installation rack includes rear door, class front door, removable side panels, front and rear rack rail, feet and castors.

These extremely strong powder coated EMS rack cabinets are available in 22 unit, 32 unit, 42 unit, are available with 600mm and 1000mm depths and have a static load capacity of 500kg. These installation represent excellent value for money and are ideal for permanent installation of data control, audio visual, light and sound equipment

Justin Case

3D News Desk

Flight Cases | 19″ Rack Cases | Peli Cases | Storm Case | Padded Bags